HXELS300 Electronic Axis High Speed Printing Machine

Main features:

1. Purpose: This machine is suitable for BOPP, PET, CPP, PVCD, as well as composite films and papers with the same properties. The printing speed of this machine is 5-300 meters/minute, and the mechanical speed is 320 meters/minute.
2. Transmission mechanism: The transmission adopts servo motors (each group is driven by independent motors). Features: Energy saving.
3. Shaftless plate installation mechanism: The plate installation adopts a cylinder to pull the core shaft for plate installation, and the horizontal adjustment adopts a screw to move. Features: Reduce version change time, ensure concentricity, and improve product quality.
4. Ink scraper mechanism: The scraper can be adjusted up, down, and at any angle. The scraper pressure adopts dual air cylinders, and the horizontal movement uses a three-phase asynchronous motor to drive the scraper support shaft to move. Feature: Extends the lifespan of the version.
5. Imprinting lifting mechanism: The imprinting adopts dual air cylinders with self-locking to protect the cylinder from air leakage and shutdown. Features: Ensure average pressure and color difference.
6. Color matching: Servo transmission automatic plate adjustment.
7. Material receiving and discharging structure: Adopting a duplex position material receiving and discharging rack, fully automatic roll changing and material receiving. The discharging tension and traction tension of material receiving and discharging adopt variable frequency vector control line speed, and the material receiving adopts vector variable frequency control. Features: Accelerated color registration and stability, no horizontal deviation. For large-scale printing, it can save materials, ink, solvents, and energy. When the feeding speed is 300 meters/minute, the maximum waste of feeding is about 10 meters, which is about 10 meters less than that of the seven motors. Ink, solvents, and energy are saved by about 15%, greatly reducing the cost of the main product.
8. Drying and cooling structure: The oven adopts a centrifugal fan for blowing and suction (with air reduction and concentration increase) and a water cooling roller to reduce the film temperature. The internal air volume of the oven forms a thermal cycle, and the temperature is controlled by an intelligent temperature controller. The return roller is water-cooled to ensure film cooling. Features: Energy saving.

Technical parameters: